Hey everybody, this is jake with geek out tech. Today, I’m going to show you how to fully restore your Mac from a Time Machine Backup. Most likely, if you’re needing to do this. you’ve had a hard drive failure or you’re upgrading your current hard drive. And if you’re upgrading to an SSD, then I’m jealous.
One thing to note here this is only for restoring the computer that was the source of the Time Machine Backup. If you’re transfering information from one computer to a different computer then you’re going to need to use Migration Assistant. So here we go.
You’ll need to have your mac turned off. Then plug in your bootable Mountain Lion USB drive And for directions on how to create a bootable Mountain Lion USB drive click this annotation. Hold down the option key and keep it held down. Then turn the Mac on.
You should see your boot options come up and select the USB boot drive and click the arrow below it. First thing you want to do is erase and partition your hard drive. To do this, click Disk Utility and Continue. Highlight the appropriate hard drive and click partition.
Set the partition layout to one partition. Select the format Mac OS X Extended Journaled. click Options and make sure the GUID Partition Table is selected. You don’t need to name the drive because it’s going to get renamed during the restore process back to what it was before.
apply and partition. Alright, that’s done and it’s time to Restore now. Go ahead and close out of Disk Utility. Now select Restore From Time Machine Backup and click Continue. Read this and make sure you’re doing the right thing.
continue. Now you can connect your Time Machine Backup Drive. and there’s mine. Select your backup drive and click Continue. Here you can restore from different backups on your drive. I’m going to restore from my most recent backup.
Select the appropriate backup and click continue. Select the correct drive and click Restore. You get a warning here that it will erase everything one that drive. Continue. and away it goes!.
How to Create System Restore Point on Windows 10
Hey guys welcome to this new tutorial. this tutorial is about creating a system restore point on windows 10. OK so let’s begin the guide now. First of all right click on this PC. Now click on Properties. Here on the left side you can see system protection. here now you can see an option to create a system restore click on Create. Now give it any name. For example if you are installing something.
Driver then give it a name like before installing abcd driver. now click create. we just created a system restore point successfully here you can see a message that the restore point was created successfully. so like this way you can create a system restore point on your Windows PC if you are going to install any critical applications and drivers so that you can safely revert back to your previous state if you have any problems with that installation. ok thank.